Showing posts with label ceiling beams. Show all posts
Showing posts with label ceiling beams. Show all posts

Loading Up

Loading Them Up


Sorry for the length of time in between blog posts. We have been hugely busy, with a lot of big orders, and with figuring out the logistics of crating and shipping big beams. Here are some pics of us loading up our order to Dallas last week. We crated up a bunch of gigantic beams, the longest was 25 feet long! 


25 foot beam in a 26 foot crate

Richard working the forklift

7 big crates, 3 of which had beams tucked into beams...10 beams total



Y'all have a good week.

Do It Yourself


 Do It Yourself


    Our ceiling beams will save you money, and are just about the easiest way to get real antique wood beams into your house. Our ceiling beams walk many fine lines. Our beams are a product about balance. They are artificial beams, hollow and lightweight, but we make them out of real antique wood. They are technically aesthetic pieces, but they have all the character of a used, antique piece of wood.


you can see the runner boards, pre-install , right above the TV


Save Time, Effort, and Money    


     We want to talk about how our ceiling beams fit into DIY (do it yourself) culture. We are big fans of DIY: if we think we can fix our car, we'll pop the hood before we take it to the mechanic; we'll build a table before we buy one; we'll paint the rooms in our houses and apartments on the weekend.

     Our hollow box beams allow homeowners to install their own rustic beams, with help from just a friend or two. When you find yourself thinking about remodeling, there are few things that make as much of a statement as ceiling beams spanning the length of your kitchen, living room or bedroom. Ceilings beams are a bold and beautiful addition to any room. And our hollow ceiling beams are about the easiest way to get that look.

     When you are remodeling your home, it can be intimidating to think about ceiling beams. You will have to add structural support, you have to hire a team of builders, or rent a forklift or even a crane. You, or your builder, will have to cut through the drywall in your walls and build framing to support the beams. You are skipping days of work by using our hollow beams, which can be installed in a fraction of the time. We love building beams for new houses too, but the area where they really shine is adding them to an existing structure, a structure that doesn't need the support, but could benefit from the beauty of wooden beams. Our beams can be installed with 2 or 3 people, and all you need is a few runner boards to attach the beam to your ceiling. They are almost as easy as foam or rubber faux beams, but have all the life and character of real wood.

     Of course,  if you have your builder or remodeler install our beams in your home, they, and you, will save on days of labor being cut out.

     Another benefit of our beams is, since the insides of them are made out of plywood - an engineered product - they will bend and warp far less than a solid ceiling beam.



installed beams

Clamps, Time, and Pressure

Like a Fine Wine


Time plus pressure is part of the equation for the creation of most things: put carbon under pressure for long enough and you get a diamond; squeeze grapes and let the juice ferment and you make wine; apply glue to wood and apply pressure with clamps and let it dry overnight and the glue will adhere stronger than the wood itself.


diamond in the rough


stomping grapes




Clamping
Pretty much everything we do at The Olde Mill is done by hand. We miter the sides of our hollow ceiling beams into interlocking male and female joints, apply glue, and clamp them together.


beam clamped up


the abyss gazes back


Make Haste Slowly
Like most things worth doing (woodwork, making wine, waiting for diamonds to form), our beams take time (and pressure, and possibly some heat). Thinking about it takes me back to high school Latin, and the phrase "festina lente", or "make haste slowly". Not a bad motto to reflect on during your day; it makes me think about the steady, but not rushed, approach it takes to work in a wood shop. If you rush things, you will make critical mistakes that add up to a poor creation; you take too long and you'll produce so slowly that you won't make a profit. I've been guilty of both: like most things it takes a tenuous balancing act.

Y'all have a good week. Make haste slowly.

2014 Habitat Home Expo Show

We at Ourso Designs and The Olde Mill were excited to participate in 2014's Habitat Home and Garden Show in Baton Rouge last weekend.

We were honored to win Habitat Home and Gardens 2014's Best in Show for Double Booth. We made a booth to showcase our two companies, Ourso Designs (kitchen and bath design), and The Olde Mill (wood shop producing custom hollow ceiling beams, tables, mantels, and more from antique wood). Our booth was actually made from our hollow box beams, and showcased our design and wood products.

practicing setting up the booth in the shop



the booth in action




Habitat Home Expo award

Thanks to everyone who worked to make the event a success, and thanks to everyone who came and saw us. See y'all there in 2015.







Trusses (trust us)


Like the inner working of quantum physics or high-level strategy in basketball, I think I was aware of trusses without ever really actively thinking about them; I built a set of trusses as my second job at The Olde Mill, thinking that they would just be ceiling beams.

TRUSS.jpg
Our first set of trusses, after installation

                  

Like all of our beams, our truss system is actually hollow, which is great for installation (you save a ton of labor costs, and don’t have to rent forklifts, like you would with a solid beam), but our trusses and beams are not for structural support.

    
While building these trusses, Richard would use words (ridge beam, king post, corbel, etc.) that I was unfamiliar with, so it seemed like some research was in order.

Trusses, in ceilings, bridges, and radio towers, are used due to their ability to bear heavy loads, and for their aesthetic appeal.

A bunch of different truss set-ups. All easily realized with our hollow box beams.
   


King Truss



The king truss is probably the most basic and simple part of the truss. It is the middle piece of the truss, which supports the top and also serves as the resting point for the struts (the diagonal beams that finish the triangle - a very strong load-bearing shape in design). The tie beam is the long beam going across the bottom, with the principal rafter running parallel with the ceiling.

King posts and struts.

                                                    



Our first truss system was a classic King post setup:

KING KELLER POST.jpg


Queen post



If you take away the single king post, and replace it with two symmetrical posts, you get a Queen Post truss.

Instead of one central post, we have two, one set to each side.

       

These are just a couple of the simplest truss styles. If you aren’t relying on the trusses for the actual support for your ceiling, you could make just about any design/configuration with our hollow box beams and trusses. You could get very complicated, or you could make your own design. But like perfect Fibonacci spirals in conch shells or the Golden Ratio in human faces, I think a good truss design will keep some of the honesty of practical geometry, even though it might not be strictly required in a non-supportive truss system. 

If you are thinking of installing ceiling beams, think about trusses too. Especially with high, vaulted ceilings, a truss system can bring an architectural element to your space, and bring a warm, natural feel to a modern space. Our hollow lightweight box beams made of 150 year old antique pine make designing and implementing your trusses super easy. Check us out at The Olde Mill. 


 

Blade Folding

Easier said, than done

These are the blades that we use on our Timberking 1600, a pretty great sawmill that we are still learning all the tricks to:


 We got in some more Long Leaf pine posts that we re-milled into veneers to make our hollow reclaimed wood ceiling beams. Last Saturday, we had some bad luck with blades that we thought were still sharp, but were just gunked up with sawdust and pitch from the pine we are cutting. So last week I soaked one blade in mineral spirits each night, and cleaned it off in the morning. But we just couldn’t get a straight cut with these blades, so we sent them out for resharpening, which requires you to fold the blade up and secure it with a zip tie or wire for shipping. If you, like me, have never really messed with replaceable sawmill blades, then this will help you when you find yourself folding a 14 foot saw blade.


Today I learned that folding a blade, if you don’t know the right technique, can be pretty tricky. I tried to hold the blade down on the ground with my foot, and then sort of wrestle it into the tri-folded shape. This worked some of the time, but more often I ended up with a blade pretzel that would whip me across the arms. After snapping myself on the arm a couple of times, I watched the video on folding blades on the DVD that came with our Timberking sawmill. Like everything in a woodshop, blade folding is almost impossible if you don’t know the right technique. If you guess, you will probably guess wrong.


Trying to wrestle the blade into shape.
 

Here is how you fold a 14 foot sawmill blade (wear gloves!)

  1. Hold blade out horizontally, with your palms facing outwards:
  2.  Turn your wrists in:                          
  3. And catch the end of the blade folding towards you and finish the fold:
  4. Then secure the blades with a zip tie:  
  5. And you are ready to store or ship your blades.